What are the common faults of XCMG roller accessories steering wheel?

The steering wheel is an important part of XCMG roller. If there is a problem with the steering wheel, it will affect the normal operation of XCMG roller, and then affect the progress and quality of the project. XCMG roller accessories agent pointed out that the following steering wheel faults must be paid attention to.
1、 If the steering wheel rotates or swings left and right during the operation of the roller, it is necessary to check the position of the rotor and transmission coupling to see whether there are loose screws or abnormal positions of the rotor and transmission coupling.
2、 It's because the roller steering wheel can't rotate and the pressure is too high. This may be due to the fracture, deformation or wear of the pin of XCMG roller accessories, or the deformation and wear of the transmission connecting rod shaft, resulting in the inability of the steering wheel to rotate.

3、 When the roller runs away, or the steering wheel stalls, it is likely to be foreign matters caused by the two-way buffer valve and spring. Be sure to check for foreign matters.
In short, XCMG roller accessories have a great impact on the performance of the whole machine. When purchasing, professional XCMG roller accessories agent shall be selected, and the accessories shall be used and maintained correctly. In case of any problem, it shall be repaired in time.
The above is some information compiled by mechanical parts manufacturers. If you have any questions, please leave a message or call us~