What are the maintenance steps of loader accessories?

If the loader accessories are maintained regularly, it can well prolong the service life of the equipment and effectively reduce the sudden faults caused by the damage of accessories during the work of the loader. The maintenance cycle of accessories is determined by the system structure and the degree of system pollution. The wear degree of accessories shall be comprehensively checked within three months and replaced once a year from half a year to one year. If there are no contaminated sundries in the filter media accessories, it is necessary to consider replacing the new oil filter, removing the washboard and installing the valve, and establishing a regular maintenance system for parts cleaning. The seller of XCMG loader accessories said that the following steps should be followed.
1. The oil filter should be checked and changed within 500 hours or three months at most.
2. Pay attention to regularly clean the oil filter at the inlet of the oil pump.
3. Fix leaks in the system.

   4. Ensure that there is no foreign matter entering the oil tank at the vent cap of the oil tank, the plug seat of the oil filter, the sealing gasket of the oil return pipe and other openings of the oil tank.
5. The servo valve must clean the plate to make the oil flow from the oil supply pipeline to the oil collector and directly return to the oil tank, so that the oil can be circulated repeatedly. If you find that the oil filter starts to block when you open the machine, you should replace the oil filter immediately.
If you want to carefully understand the maintenance of accessories, you need to consult the parts Seller of XCMG loader. According to the service life of accessories, you can get a more professional answer to the maintenance of accessories.